Dip Pretreatment Plant & Electro-paint Facilities At Foleshill Metal Finishing

pretreatment plant

Foleshill Metal Finishing in Coventry add to their electropaint capacity with a new dip pretreatment plant and electropaint system. The plant incorporates acid descaling for laser cut products, a unique space saving walking beam stoving oven arrangement. They also incorporated a zinc phosphate tank with agitation and filtration. The zinc phosphate tank consists of a collection tank, sludge transfer pump and filter press. TD Finishing offers the design and installation of bespoke finishing systems for clients in the UK, across Europe and the rest of the world.

Pretreatment Plant – The Capabilities

The system is capable of coating products up to, and including, 2000mm long x 1,500mm high x 1,000mm wide. It was split into three separate processes:

  1. Pretreatment plant with 14 separate dip processes
  2. Electrophoretic coating, which consisted of a further four stages, one e-coat and three UF rinses
  3. Stoving – The flight bar is then transferred to the oven by the transporter system. The walking beam mechanism indexes the products through the stoving oven for a minimum of 30 minutes.

Included within the scope of supply for this system were cleaning tanks, pickling tanks and rinses. The system, where appropriate, utilises gas or electric heating, as well as lip extraction for high-temperature tanks. This helps to ensure a safe working environment for employees. The automated transporter system with PLC/HMI controls, transfers the workload flight bar from the pre-treatment line, onto the electrophoretic coating line. It will then deposit it into the stoving oven. 

Efficient and Environmentally Conscious

To improve the process and save water, the system was supplied with a new R.O unit for demineralized water, water counterflow and recycling system. As well as a pH correction system for overflow to drain.
All equipment is designed using the latest CAD technology, by our amazing team of in-house engineers. Their experience enables them to create up to date systems that meet clients demands, and all the current market requirements. This design experience is used for plant from basic batch equipment, to complete conveyorised systems incorporating HMI touch screen and PLC controls.

Quality Dip and Spray Pre-Treatment Systems You Can Trust

All TD Finishing contracts are project managed from order placement, through to design, manufacture, installation and commissioning. This provides the clients with systems that are installed to programme, and meet the latest environmental standards. From receipt of an enquiry, TD Finishing carries out an initial site survey and meet with the clients to discuss their requirements. Following on, a preliminary design and proposal is issued.  

Contact us Today

TD Finishing Ltd specialise in site survey and product evaluation. We provide prospective clients with a full specification and layout drawing detailing the proposed plant concept. If you would like to find out more about pretreatment plant installation, head to our website today. 
Alternatively, you can call 0121 520 8884 to speak to a member of our helpful and friendly team.
We really hope you’ve enjoyed this article on our dip pre-treatment system, you might also like to read our previous blog on Powder Coating Line Installation