industrial drying oven

Industrial Drying Oven Solutions At TD Finishing

TD Finishing is one of the country’s leading suppliers of industrial powder coating equipment including industrial drying oven solutions. In fact, we have plenty of experience designing and supplying industrial dryers and ovens that are suitable for use across a wide range of industries. This is including pre-treatment, NDT, paint, coatings, and aerospace. 

We supply all of our oven dryers with:

  • Pressure relief panels in the roof made of rockwool and composition sheeting
  • Purpose made insulated oven panels, with integral structural construction
  • Internal ducting, which we individually design to suit each client’s product and process requirements 
  • Fully adjustable heat distribution
  • Insulated floors
  • A heater unit containing gas, oil, steam or electric heating a long with an efficient T.E.F.C. electric circulation fan
  • Where applicable the dryer will also be supplied with an exhaust fan or negative pressure air-seals ducted to atmosphere

TD Finishing has the best powder coating equipment and can supply your industrial drying oven to suit any type of drying process and in any of the following options. 


Box Oven Dryer

We supply box oven dryers for batch processing and oversized items. These are available with electric or gas-fired heating systems and we can make them to suit any size of product or process. We also supply them with an overhead rail for loading of heavy components. Or, with a plate-steel floor when you will be utilising trolleys and other methods.


Well Oven Dryer

Well oven dryers are for in the batch processing of pre-treated components. Therefore, we typically supply them for the end of a pre-treatment system. They are available with or without lids of manual or pneumatic operations. You can utilise well type dryers using an overhead gantry crane or power and free systems with automated track drop sections. 


Monorail Conveyor Dryer

If you are continuously using an overhead conveyor, there are plenty of dryers here at TD Finishing to choose from. Additionally, we can accommodate any track length or speed too. We supply the conveyor type dryers with negative air-pressure seals, fully modulating burners, and specialised drying distribution ducting to suit the client’s product.  Where applicable Infra-red dryers can also be supplied. 


Belt Conveyor Dryer

Where a process is not suitable for hanging but requires a continuous drying process, we can supply belt conveyor systems. This is ideal for cookware, glass, electronics, and small mass-produced components including fixings and fasteners. 


Bespoke Industrial Drying Oven Solutions

We supply all our oven dryers with customised control system to suit any needs. Additionally, should you require it, we can offer a wide range of data acquisition and systems too. Suitable for intranet connections and industry 4.0 and integrated into a new or existing system. 

If you are looking for an industrial drying oven or would like to find out more about our drying ovens, then head to our website today. Alternatively, you can call 0121 520 8884 to speak to a member of our helpful and friendly team. Or, email


If you have found this blog helpful, then you may wish to read a previous blog on: Powder Coating Equipment Manufacturers | TD Finishing update Recol Ltd’s powder coating facility.

complete finishing systems

TD Finishing Celebrates Being Granted Made In Britain Membership

TD Finishing has been accredited as a member of Made in Britain. TD’s adoption of the official, protected mark will help buyers recognise their products as good quality, great value and British-made.

The mark also lets customers know that TD Finishing is a trusted company that values transparency, sustainability and ethical business practices. Consumers are increasingly recognising the Made in Britain mark as a mark of confidence.


Complete Finishing Systems ‘Made In Britain’

Dave Harris our Technical Manager, explains what the ‘Made in Britain’ mark means to us at TD Finishing. In addition, he explains why it has been adopted:

“September 2021 sees TD Finishing enter our 20th year of continuous trading and we’re very proud to have been designing and manufacturing our paint and powder systems in Britain, the Made in Britain mark helps us celebrate this. The protected mark not only highlights the quality of our products, but it also highlights the quality of our working practices and how we go about our business. This is something that we are incredibly proud of. The Made in Britain mark will be displayed on our equipment along with our CE & UKCA marks as we feel that the values it represents is as important as the compliance of our equipment”.

John Pearce, chief executive of Made in Britain said:

“We’re delighted that TD Finishing has joined the community of more than 1200 British manufacturers. The more the mark is used and seen, the more it is recognised as a mark of quality. In addition to getting access to the official protected mark, TD Finishing will also start to enjoy the many other benefits membership to Made in Britain brings.  We look forward to supporting TD as they enter their 20th year and continue to grow”.

TD Finishing Ltd, design and supply complete powder coating and wet paint systems. So, for more information about TD Finishing visit our website today or get in touch. Our friendly team will be happy to assist you with any queries you have.

For more information about Made in Britain visit: 

process ovens

Process Ovens at TD Finishing – powder coating and paint lines

Process Ovens.

As well as Finishing Ovens, paint line finishing equipment and powder coating systems TD Finishing also offer a full range of process ovens for a wide range of manufacturing industries including, but not limited to, AMS Ovens, Military, Marine and Composites.

The processes catered for include low-temperature material & drum warming, also pre-treatment and paint drying, as well as heat treatment and high-temperature coating cure.  Front opening, as well as top-loading oven dryer options, are available with manual, powered or automated door systems.

Related: Finishing Systems – Paint and Powder Perfection From tdf

TD Finishing ovens are available for AMS 2750E process and can be supplied in line with Furnace Class requirements 1 to 5 along with Instrument Types A to E, as indicated in the tables below;

Furnace Class Temperature Uniformity
Range (°F)
Temperature Uniformity
Range (°C)
1 ± 5 ± 3
2 ± 10 ± 6
3 ± 15 ± 8
4 ± 20 ± 10
5 ± 25 ± 14
6 ± 50 ± 28
Sensors Required by Instrument Type Instrument Type
One control sensor per zone that controls and displays temperature
The temperature indicated by the control sensor in each control zone shall be recorded by a recording instrument.
Alternatively, the recording instrument may be connected to a second sensor contained in the same sheath or holder as the control sensor, and separated from the control sensor by no more than 10mm.
At least two additional recording sensors in each control zone shall be located to best represent the coldest and hottest temperatures based on the results from the most recent temperature uniformity survey.
At least 1 recording sensor in each zone
Each control zone shall have over-temperature protection.
The recording sensor representing the hottest location may also be utilized as the over-temperature protection sensor.

Where required process ovens can also be supplied with multi-channel chart recorders, thermocouple & vacuum manifolds, process deviation alarms and touch screen HDMI systems with ethernet connection/ remote monitoring capabilities.

For continuous processes, we also offer a full range of overhead monorail conveyor systems and flat-bed conveyorized ovens.  Fitted with efficient positive pressure air-knives and Electric-heater batteries or fully modulating (gas and air) burners.


TD Finishing

So, if you have requirements for process ovens from drum warming to aeroplane manufacture, don’t hesitate to contact us today. Also, our powder coating systems are industry-leading.

You might also like to read our blogs on Powder Curing Oven or Mike Shawcross Joins TD Finishing